Elektron Interactive Manual

← All procedures

Load a recovery OS (RESCUE MODE)

MAIN_VOLUMEVolumeLEVEL_DATALevel / DataPRESET — FileFileSETTINGS — Save ProjSave ProjSAMPLING — SamplesSamplesTEMPO — Tap TempoTap TempoARP — Toggle On/OffARPToggle On/OffCHORD — Toggle On/OffCHORDToggle On/OffSONG — Toggle On/OffSONGToggle On/OffSCREENTonverkENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHFUNCFUNCTRK — PerformTRKPerformPTN — TransitionPTNTransitionMUTE — RoutingMUTERoutingREC — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteTRIG_PARAMS — SetupTRIGSetupSRC — SetupSRCSetupFLTR — SetupFLTRSetupAMP — SetupAMPSetupFX — SetupFXSetupMOD — SetupMODSetupKB_CS1 — RecallC#1RecallKB_DS1 — MemorizeD#1MemorizeKB_FS1 — MetronomeF#1MetronomeKB_GS1 — QuantizeG#1QuantizeKB_AS1 — ScaleA#1ScaleSTEP_EDIT▰▱PLUS — Transpose+TransposeMINUS — Transform-TransformYES — RedoYESRedoNO — UndoNOUndoUP — Sequence Lane^Sequence LaneLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+FILL — Fill EditFILLFill EditPAGE — Page SetupPAGEPage SetupKB_C1C1KB_D1D1KB_E1E1KB_F1F1KB_G1G1KB_A1A1KB_B1B1KB_C2C2TRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
1 / 5
  1. NoteOn a computer, name any Tonverk OS file 'OS.swu' and copy it to the ROOT of the SD card using an external card reader, then put the card back in Tonverk.
  2. HoldHold FUNC while powering up to enter RESCUE MODE.
  3. PressPress TRIG 2 to load the recovery OS.
  4. PressWhen loaded, press YES to return to the RESCUE MODE menu.
  5. PressPress TRIG 4 to exit and reboot on the recovery OS. Use SETTINGS > SYSTEM > OS UPGRADE afterwards to move to a standard OS.

Result: The device boots a known-good OS.

Source: manual §18

Related: Enter RESCUE MODE · Upgrade the Tonverk OS