Record trigs in STEP RECORDING mode (STANDARD)

1. ComboHold [RECORD] and press [STOP] to enter STEP RECORDING mode. The [RECORD] key double-blinks red. (Press [STOP] twice while keeping [RECORD] pressed to toggle between STANDARD and JUMP mode.)
2. PressPress a [TRIG] key to select the active step where you want to start adding note trigs (TRIG_1 shown). The active step double-blinks green. You can also use [LEFT]/[RIGHT] to select the active step or skip steps.
3. ComboHold [FUNC] and press a [TRIG 1-16] key (TRIG_1 shown) to add a note trig on the corresponding track to the active step. The active step automatically advances.
4. NoteTo add note trigs chromatically: select a track with [TRK] + [TRIG 1-16], press [KEYBOARD] to toggle the chromatic keyboard on, then hold [KEYBOARD] and press any lit [TRIG] key to add a note trig with that note value. Use [UP]/[DOWN] to transpose in octaves.
5. PressTo remove a trig or add a rest, position the active step on it and press [NO]. The active step automatically advances.
6. NoteTo add a parameter lock, press and hold a [TRIG] key and turn the DATA ENTRY knob that controls the parameter you want to lock.
7. PressPress [RECORD] to exit STEP RECORDING mode.

Result: Note trigs are placed step by step on the sequencer.

Source: manual §10.2